How to choose a doorbell button: name, logo and LED models

Which model fits your existing bell connection?

All five models fit your existing doorbell connection; they differ only in how the panel light is powered.

• Name, Welcome and Do Not Disturb, and logo panels: run on a 12 V adaptor or the home intercom connection; the box holds 1 adaptor and fixing screws.
• Standard LED button: fits straight onto the existing bell and the blue LED around its edge lights up, with no extra power connection.
• Wooden Welcome panel: connects directly to the bell and fixes to a wall or wooden surface through ready-made screw holes on each side.

Blocks of flats usually have an intercom and houses often a standalone bell; if you are unsure, ask an electrician to check before ordering and to plan where any adaptor will connect.

How do name, logo and ready-made models differ?

The models differ in wording, personalisation, size and material. The table compares all five, based on the product details.

On the name panel with Welcome and Do Not Disturb, a switch under the panel lights the RAHATSIZ ETMEYİNİZ (Do Not Disturb) lettering, so visitors know you are unavailable before they ring: useful while a baby sleeps or while you work from home. Keep the switch within reach; the lettering is in Turkish.

A 30 × 9 cm panel or an 8 × 17 cm button?

If there is room for a 30 cm wide panel beside the door, choose a panel; if only a narrow strip remains beside the frame or intercom unit, the upright metal button fits more easily. Panels are landscape; the button is portrait.

• Old button marks: The new body should cover the old screw holes and paint marks.
• Door and handle: With the door fully open, neither the handle nor the leaf should touch the panel.
• Cable outlet: The position follows the point where the bell cable leaves the wall; moving it means extending the cable.
• Nearby fittings: Keep the panel clear of the intercom unit, light switch and door number.

For a narrow spot, the 8 × 17 cm LED metal button is a practical choice; pick its gold or black body to match your door handle.

Which model suits a flat, a house, an office or a hotel?

A name panel often suits a flat, a ready-made model in a sheltered spot a house, a logo panel an office, and the Do Not Disturb panel places that host guests.

Flats

Among similar corridor doors, a name panel makes yours easy to recognise, and an LED-lit panel stands out in a dim corridor. If the building has an intercom, the panel can run from it; your electrician will advise.

Houses

On a house, the bell is often on an outside wall. With no verified information on how the panels stand up to rain or direct sun, plan the button under a porch roof or in an enclosed porch, and ask us first about an exposed garden gate. With a timber door, the pine-framed Welcome panel continues the material.

Offices, clinics and practices

Where several doors share a floor, the logo and name doorbell shows your company name and logo together. It comes in plastic housing and acrylic as standard, or in wood if you say so with your order number. In shared office buildings, check with the management before fitting.

Hotels, guesthouses and workplaces

On a reception or office door, a logo panel keeps the business name in view. Hotel guests know a Do Not Disturb light, but this panel is made with a full name; for other wording such as a room number, or for several doors, write to us first. Shared doors without personalisation suit the metal button.

How do you send your name and logo details?

For name and logo panels, you type the name in the “Name to display” field on the product page as you order; for the logo model, you upload your logo in the “Logo file” field on the same page. The panel is made from these details, so check the spelling carefully before adding to your basket.

1. Choose the model: Open the product page of the name, Welcome or logo model.
2. Text: In “Name to display”, give the name exactly as you want it: first name and surname for the Welcome model, the company or family name for the logo model.
3. Logo and material: Upload your logo as a PNG, JPG or PDF; if the upload does not work, or you want the wooden version, write to us after ordering with your order number through the channels on our contact page.
4. Final check: Reread the letters, including any Turkish letters in the name.

Add any logo file questions to the same message; for a gift, confirm the recipient's spelling. For your information: items made to your name or logo are not covered by the right of withdrawal; your statutory rights still apply if an item arrives faulty or damaged.

How is a doorbell button fitted?

The button connects to your existing bell wiring and is screwed to the wall; we recommend a qualified electrician for the job. Fitting usually goes like this:

1. Power off: Switch off the relevant circuit breaker before touching the bell wiring.
2. Old button: Remove it, noting which wire goes where.
3. Power source: For name and logo panels, your electrician chooses between the adaptor and the intercom connection.
4. Drilling: For new holes, check for hidden cables and pipes with a detector; the name, logo and wooden panels come with fixing screws.
5. Test: Restore power and check that the bell rings and the panel lights up.

How do you complete the entrance with a doorbell and a sconce?

The panel introduces your door and a slim sconce beside it lights the entrance in the evening; one colour family ties them together. In enclosed corridors and hallways, 4.5 cm wide Bubblelight sconces fit the narrow wall between frame and corner. Match a gold or black button with the same body colour, and the anthracite wooden panel with an anthracite sconce. With no supply by the door, a battery-powered sconce needs no cable; see our battery vs hardwired sconce guide, and for height, the sconce placement guide.

Try the sconce on a photo of your doorway with See it in your room. The photo is processed only in your browser and is never sent to a server; confirm the final position with a tape measure.

Start with your bell system and the space by the door, then the wording; for name and logo models, type the name in the field on the product page. Compare every model on our doorbell buttons page.

Frequently Asked Questions

Does a doorbell button work with any bell system?

BACKHOME doorbell buttons fit your existing doorbell connection. Name and logo panels run on a 12 V adaptor or the home intercom connection; the metal standard button needs no extra power. As wiring varies between buildings, have an electrician check your system before ordering.

Can a doorbell button be fitted outdoors?

We have no verified information on how the panels stand up to rain or direct sun. Plan them for sheltered entrances such as a flat door, an office corridor or a spot under a porch roof. If you have an exposed wall or a garden gate in mind, ask us before you order.

Which doorbell button fits beside a narrow door frame?

The LED standard button suits narrow spots: 8 cm wide and 17 cm tall, it fits the strip between the door frame and the corner. The name, logo and wooden panels are 30 cm wide and landscape. Measure the free space with the door open before ordering.

Can I fit a doorbell button myself?

Because it connects to the bell wiring, we recommend a qualified electrician, with the circuit breaker switched off first. For name panels, the choice of adaptor or intercom also depends on your building's wiring. For new screw holes, check for hidden cables and pipes with a detector.

Which doorbell button suits renters?

A model without a name is practical if you rent: the wooden Welcome panel and the metal standard button still suit the next tenant. If you choose a name panel, ask your landlord first and keep the old button so you can refit it when you move out.

Which doorbell button makes a good housewarming gift?

If you know exactly how the recipient spells their name, a name panel makes a personal gift: you order and type the name on the product page. If you are unsure of the spelling or want a surprise, the wooden Welcome panel needs no name details.